Permanently remove excess hair from various parts of the body, such as: face, arms, back, chest, armpits, bikini line hair removal, legs, etc. 808 semiconductor laser permanent hair removal instrument technical parameters:
1. Laser wavelength: 808nm
2. Spot area: 12*16mm23*40mm optional
3. Pulse frequency: 1-10HZ adjustable
4. Pulse width: 10~400ms or 10~300ms
5. Output power: 600W800W1600W optional
6. Sapphire contact temperature: -5~0℃
7. Refrigeration system: TEC refrigeration system
8, energy density: 1-130J/cm2
808 semiconductor hair removal instrument operation method steps 808 hair removal instrument parameter explanation
Explanation of parameters:
1. The energy density is in units of J/cm2, which is the output energy value on the skin obtained by multiplying the pulse width and the frequency by a function relationship. The energy density is mainly directly related to the frequency and the pulse width.
2. Pulse width, in milliseconds and ms. It refers to the action time of the 808nm semiconductor laser acting under the skin. The larger the pulse width, the longer the light will act under the skin, so the better the effect (pulse width is mainly Affect the effect)
3. Frequency, the number of times the handle emits light within one second, that is, the speed of light. The frequency is mainly related to the pain. The more sensitive people have a higher frequency, the less sensitive the frequency is, the higher the frequency is The faster the light output speed, the operation method should be sliding back and forth according to the light speed close to the skin at a uniform speed. The higher the frequency, the faster the slide, and the lower the frequency, the slower the speed.
Explanation of parameters:
1. The energy density is in units of J/cm2, which is the output energy value on the skin obtained by multiplying the pulse width and the frequency by a function relationship. The energy density is mainly directly related to the frequency and the pulse width.
2. Pulse width, in milliseconds and ms. It refers to the action time of the 808nm semiconductor laser acting under the skin. The larger the pulse width, the longer the light will act under the skin, so the better the effect (pulse width is mainly Affect the effect)
3. Frequency, the number of times the handle emits light within one second, that is, the speed of light. The frequency is mainly related to the pain. The more sensitive people have a higher frequency, the less sensitive the frequency is, the higher the frequency is The faster the light output speed, the operation method should be sliding back and forth according to the light speed to the skin at a uniform speed. The higher the frequency, the faster the slide, and the lower the frequency, the slower the speed.
Operation parameter adjustment: according to body parts, small parts (lip hair, hairline, underarms, bikini) and large parts (legs, arms, abdomen, back)
Small parts parameter adjustment:
First fix the frequency at 1-3Hz or 3-5Hz, and adjust the energy to 70-90J by pulse width addition and subtraction for 2-3 minutes. The two or three minutes are mainly for the customer to adapt. After two or three minutes, add the pulse Wide, after adjusting the energy to 90-110J, the customer will have a slight tingling sensation (to be adjusted to a high energy that the customer can tolerate), and has been sliding back and forth quickly to achieve a clinical endpoint response
Clinical endpoint reaction: stiff hair (thick black and hard, such as male beard, hairline, underarm, bikini and other parts are stiff hair)
This kind of hard hair can be done. 1. The hair can be easily clipped or 2. The hair follicle is slightly raised, and the mouth of the hair follicle is white and soft (soft and light color, such as female arms, leg hair, back, abdomen, face, etc.)
808 semiconductor hair removal instrument operation method steps 808 hair removal instrument parameter explanation
The clinical endpoint response of these soft hairs is:
1. Fever under the skin, redness of the epidermis
2. There is a slight burnt smell or the hair is slightly curled (the longer hair is more obvious without applying cold gel)
3. Hair follicles are slightly raised
Large part parameter adjustment:
Energy percentage remains 100%
Frequency (the last parameter): 5-7Hz
Finally, through the pulse width (the penultimate parameter), through the addition and subtraction of the pulse width, the energy density is displayed at 100-110J for the customer for 2-3 minutes, and then the pulse width is adjusted to increase the energy to 110-120J. Just do it until there is a clinical endpoint reaction
Operation methods:
When starting to use adaptive energy to do 2-3 minutes for the customer, it can be slightly slow, keep pressing the handle button to emit light, and slide slowly back and forth against the skin
After 2-3 minutes, no matter it is a large part or a small part, the energy will be increased. Once the energy is increased, especially the small part, if the method is still slow, the customer will not be able to bear the light, so the method of attention at this time is A little bit faster, slide it on the customer's skin a few times, slide it on the ice, and then slide it out of the light. Repeat this way of operation until the clinical endpoint response appears.
Here's the ice pack: Turn on the refrigeration display on the instrument interface and the green is on. Before operation, we have to wait for the handle probe to feel cold and then emit light. After 2-3 minutes, the ice pack after the energy is turned up means that the handle button is not pressed , Directly use the handle probe light to slide back and forth on the customer's skin, and then press the button to slide the light several times, then do not press the button to slide the light, repeat this operation
